Sub-Ohm Vaping: Everything You Need to Know

Sub-ohm vaping is a popular method of vaping that has gained a lot of attention in recent years. It is a technique of vaping that involves using a coil with a resistance level that is below one ohm. The lower resistance level allows for a higher wattage output, which produces bigger and thicker clouds of vapor.

Sub-ohm vaping is a great way to enhance your vaping experience. The technique produces a warmer and more flavorful hit, which is preferred by many vapers. However, sub-ohm vaping is not for everyone. It is important to understand the pros and cons of sub-ohm vaping before you try it out for yourself.

Sub-Ohm Basics

Sub-ohm vaping is a style of vaping that involves using a device with a coil that has a resistance level below one ohm. This type of vaping is becoming increasingly popular among vaping enthusiasts because it produces larger clouds of vapor and more intense flavors than traditional vaping.

Sub-ohm vaping is based on Ohm’s Law, which states that the current flowing through a conductor between two points is directly proportional to the voltage across the two points and inversely proportional to the resistance between them. In simpler terms, the lower the resistance of the coil, the more current will flow through it, resulting in more vapor production.

When sub-ohm vaping, it is important to use a device that is specifically designed for sub-ohm vaping, as using a regular device with a sub-ohm coil can be dangerous. Sub-ohm coils require more power to operate, which means that they can drain your battery faster and generate more heat than regular coils.

To get started with sub-ohm vaping, you will need a sub-ohm tank or rebuildable atomizer, a device that can handle sub-ohm coils, and a battery with a high enough discharge rate to handle the increased power demands. It is also important to use the correct type of e-liquid, as sub-ohm coils can quickly burn through high nicotine e-liquids.

Overall, sub-ohm vaping can be a fun and rewarding experience for those who are looking for bigger clouds and more intense flavors. However, it is important to approach sub-ohm vaping with caution and to always use the proper equipment and e-liquids to ensure your safety and enjoyment.

Importance of Sub-Ohm

Sub-ohm vaping has become increasingly popular among vapers over the years. But why is sub-ohm vaping so important? Here are a few reasons:

Increased Vapor Production

One of the biggest benefits of sub-ohm vaping is the increased vapor production. Because sub-ohm coils have a lower resistance, they can heat up faster and produce more vapor than coils with a higher resistance. This means that you can get bigger clouds and a more satisfying vaping experience.

Improved Flavor

Sub-ohm vaping also tends to produce more intense flavor than traditional vaping. This is because the increased vapor production allows for a more efficient delivery of flavor molecules to your taste buds. So, if you’re someone who enjoys bold, flavorful e-juices, sub-ohm vaping might be the way to go.

Customization Options

Another advantage of sub-ohm vaping is the increased customization options. Because sub-ohm coils have a lower resistance, you can adjust your wattage and voltage settings to fine-tune your vaping experience. This allows you to tailor your vaping experience to your preferences and get the most out of your e-juices.

Cloud Chasing

Finally, sub-ohm vaping has become popular among vapers who enjoy “cloud chasing.” This is the practice of producing large, dense clouds of vapor for the sake of entertainment or competition. Sub-ohm vaping is ideal for cloud chasing because of the increased vapor production and customization options.

Overall, sub-ohm vaping can provide a more satisfying and customizable vaping experience. However, it’s important to note that sub-ohm vaping can also be more dangerous than traditional vaping if not done correctly. Make sure to research and understand the risks before diving into sub-ohm vaping.

Types of Sub-Ohm Devices

When it comes to sub-ohm vaping, there are two main types of devices: mechanical mods and regulated mods.

Mechanical Mods

Mechanical mods are devices that do not have any electronic components. They are simple devices that use a battery, a switch, and a connection for the atomizer. When you press the switch, the battery sends power to the atomizer, which heats up the coil and vaporizes the e-liquid.

Mechanical mods are popular with experienced vapers because they offer a high level of customization and control. However, they can be dangerous if not used correctly. It is important to understand Ohm’s law and battery safety when using a mechanical mod.

Regulated Mods

Regulated mods are devices that have electronic components that regulate the power output. They typically have a screen that displays information such as battery life, coil resistance, and wattage. Regulated mods offer a safer and more user-friendly option for sub-ohm vaping, especially for beginners.

Regulated mods come in different shapes and sizes, from box mods to tube mods. They also come with a range of features, such as temperature control and variable wattage. Some regulated mods even have built-in safety features, such as short circuit protection and overheat protection.

Overall, both mechanical mods and regulated mods have their pros and cons. Mechanical mods offer more customization and control, but require more knowledge and experience to use safely. Regulated mods offer a safer and more user-friendly option, but may not offer as much customization. It’s important to choose the type of sub-ohm device that best suits your needs and experience level.

Sub-Ohm Safety

Sub-ohm vaping can be an enjoyable and rewarding experience, but it is important to be aware of the risks associated with it. Here are some essential safety tips to follow when sub-ohm vaping:

Use Regulated Mods

Using a regulated box mod is the safest way to enjoy the fascinating benefits of sub-ohm vaping with significantly less risk. Regulated mods are a popular option for beginner and intermediate vapers. They offer a range of safety features such as short-circuit protection, over-discharge protection, and overheat protection.

Choose the Correct Battery

Battery safety is a major part of all vaping styles, but especially so with sub-ohm vaping. It’s important to choose the correct battery for your device, with unprotected IMR and hybrid lithium batteries being the most popular and often safest options due to their specialized chemistry and construction. Always check the amp limit of your battery and never exceed it.

Build Safe Coils

When building your own coils, it’s important to ensure that they are safe and within the limits of your battery’s amp rating. Plugging the max continuous current rating of your battery into an Ohm’s law calculator will give you the absolute minimum resistance you can build to without overstressing your battery.

Use Quality E-Liquid

Using quality e-liquid is essential for sub-ohm vaping. Poor quality e-liquid can contain impurities that can damage your coils and harm your health. Always buy e-liquid from reputable manufacturers and avoid using homemade e-liquid.

Practice Proper Maintenance

Proper maintenance of your device is essential for sub-ohm vaping. Regularly clean your tank, replace your coils, and check your battery for any signs of damage or wear. Always follow the manufacturer’s instructions for your device and don’t take any shortcuts.

By following these safety tips, you can enjoy the benefits of sub-ohm vaping while minimizing the risks associated with it. Remember, safety should always come first when it comes to vaping.

Sub-Ohm Vaping Techniques

Sub-Ohm vaping is a vaping style that involves using an atomizer with a resistance level of below one Ohm to produce massive amounts of flavorsome clouds. This style usually attracts those who look for big vapor clouds, warmer drags, and increased vapor flavors. Here are two sub-ohm vaping techniques that you can try:

Direct Lung Inhale

Direct Lung Inhale (DLI) is a vaping technique where you inhale the vapor directly into your lungs, similar to taking a deep breath. This technique requires a powerful device and a sub-ohm tank with a low-resistance coil. Here are the steps to follow when using the DLI technique:

1. Take a long drag from your device and inhale the vapor directly into your lungs.
2. Hold the vapor in your lungs for a few seconds before exhaling.
3. Exhale the vapor slowly to enjoy the full flavor and cloud production.

Mouth to Lung Inhale

Mouth to Lung Inhale (MTL) is a vaping technique that involves inhaling the vapor into your mouth first, then inhaling it into your lungs. This technique is similar to smoking a cigarette and is popular among those who prefer a tighter draw and a more discreet vaping experience. Here are the steps to follow when using the MTL technique:

1. Take a small drag from your device and inhale the vapor into your mouth.
2. Hold the vapor in your mouth for a few seconds before inhaling it into your lungs.
3. Exhale the vapor slowly to enjoy the full flavor and cloud production.

Remember, sub-ohm vaping requires a powerful device and a sub-ohm tank with a low-resistance coil. Always make sure that you have the proper equipment and knowledge before attempting sub-ohm vaping techniques.

Choosing the Right E-Liquid for Sub-Ohm

When it comes to sub-ohm vaping, choosing the right e-liquid is just as important as selecting the right hardware. Here are a few things to keep in mind when selecting an e-liquid for your sub-ohm tank:

VG/PG Ratio

The VG/PG ratio of an e-liquid is a crucial factor to consider when sub-ohm vaping. Generally, sub-ohm vapers prefer a higher VG ratio as it produces thicker clouds and a smoother vaping experience. A 70% VG / 30% PG split is a good starting point for sub-ohm vaping. However, some vapers prefer even higher VG ratios, up to 80% or 90% VG.

Nicotine Concentration

The nicotine concentration of your e-liquid is another important factor to consider when sub-ohm vaping. Sub-ohm tanks tend to produce more vapor, which means you may be inhaling more nicotine per puff. As a result, it’s recommended to choose an e-liquid with a lower nicotine concentration, such as 3mg or 6mg.

Flavor

Choosing the right flavor is a matter of personal preference, but it’s important to keep in mind that some flavors may perform better in a sub-ohm tank than others. For example, flavors that are too subtle or complex may not come through as well in a sub-ohm tank. On the other hand, bold and simple flavors tend to work well in sub-ohm tanks.

Quality

Finally, it’s important to choose a high-quality e-liquid that is free from contaminants and produced in a clean environment. This is especially important when sub-ohm vaping, as the higher temperatures and wattages can amplify any impurities in the e-liquid. Look for e-liquids from reputable manufacturers and read reviews from other vapers to ensure you’re getting a high-quality product.

Maintenance of Sub-Ohm Devices

Sub-ohm devices require proper maintenance to ensure optimal performance and longevity. Here are some tips to keep your sub-ohm device in top shape:

Keep Your Device Clean

Regular cleaning is essential to prevent buildup of e-liquid residue and dirt. Use a soft cloth or cotton swab to clean the exterior of your device. For a deeper clean, disassemble the device and wash its components with warm water and mild soap. Make sure to dry the components thoroughly before reassembling.

Check Your Coils Regularly

Coils are the heart of your sub-ohm device, and they need to be replaced periodically. Replace the coils when you notice a burnt taste or a decrease in vapor production. Check the coils regularly to ensure they are not clogged with residue or burnt material. Clean the coils gently with a soft brush or cotton swab to remove any buildup.

Monitor Your Battery

The battery is another critical component of your sub-ohm device. Keep an eye on the battery level and recharge it when necessary. Avoid overcharging the battery, as this can damage the device and reduce its lifespan. If you notice any signs of damage or wear on the battery, replace it immediately.

Store Your Device Properly

When you’re not using your sub-ohm device, store it in a safe and dry place. Avoid exposing the device to extreme temperatures or humidity, as this can damage the battery and other components. Keep the device away from children and pets, and never leave it unattended while charging.

Use the Right E-Liquid

Using the right e-liquid is essential for optimal performance and longevity of your sub-ohm device. Use high-quality e-liquids that are designed for sub-ohm vaping. Avoid using e-liquids with high levels of sweeteners, as these can clog the coils and reduce vapor production.

By following these tips, you can keep your sub-ohm device in top shape and enjoy a satisfying vaping experience.

Pros and Cons of Sub-Ohm Vaping

Sub-ohm vaping has become increasingly popular among vapers. It involves using a coil with a resistance of less than one ohm, which allows for more power to be delivered to the atomizer. While sub-ohm vaping has its advantages, it also has its downsides. Here are some pros and cons of sub-ohm vaping:

Pros

• Increased Vapor Production: Sub-ohm vaping produces more vapor than regular vaping. This is because the coil heats up faster, allowing more e-liquid to be vaporized at once. If you enjoy producing large clouds of vapor, sub-ohm vaping may be for you.
• Better Flavor: Sub-ohm vaping allows for a more intense flavor experience. This is because the increased vapor production allows the flavor to be more concentrated. If you enjoy bold, flavorful hits, sub-ohm vaping may be for you.
• Stronger Throat Hit: Sub-ohm vaping produces a stronger throat hit than regular vaping. This is because the increased vapor production allows for more nicotine to be delivered to your system. If you are looking for a stronger throat hit, sub-ohm vaping may be for you.

Cons

• Increased E-Liquid Consumption: Sub-ohm vaping uses more e-liquid than regular vaping. This is because the increased vapor production requires more e-liquid to be vaporized. If you are on a tight budget or want to conserve your e-liquid, sub-ohm vaping may not be for you.
• Battery Drain: Sub-ohm vaping requires more power than regular vaping. This means that your battery will drain faster, and you may need to recharge more often. If you are frequently on the go and cannot recharge your battery, sub-ohm vaping may not be for you.
• Risk of Dry Hits: Sub-ohm vaping increases the risk of dry hits. This is because the increased vapor production can quickly vaporize all the e-liquid in the wick, causing it to burn. Dry hits are unpleasant and can damage your coil. If you are not experienced with sub-ohm vaping, you may want to start with a higher resistance coil to reduce the risk of dry hits.

Overall, sub-ohm vaping has its pros and cons. It can produce large clouds of vapor, intense flavors, and a strong throat hit, but it also uses more e-liquid, drains your battery faster, and increases the risk of dry hits. Consider your preferences and experience level before deciding whether sub-ohm vaping is right for you.

Frequently Asked Questions

What is sub-ohm vaping?

Sub-ohm vaping is when you use a vaping device that has coils with a resistance of less than one ohm. This type of vaping produces bigger clouds and stronger hits than regular vaping.

Are sub-ohm devices safe to use?

Sub-ohm devices are generally safe to use as long as you follow the manufacturer’s instructions and use them properly. However, sub-ohm vaping can be more dangerous than regular vaping if you don’t know what you’re doing. It’s important to educate yourself on sub-ohm vaping and practice safe vaping habits.

What are the benefits of using a sub-ohm kit?

The benefits of using a sub-ohm kit include bigger clouds and stronger hits, better flavor, and a more satisfying vaping experience. Sub-ohm vaping also allows you to use higher VG e-liquids, which can produce thicker clouds and richer flavors.

How does sub-ohm vaping differ from regular vaping?

Sub-ohm vaping differs from regular vaping in several ways. Sub-ohm devices use coils with a lower resistance, which allows for more power to be delivered to the coil. This results in bigger clouds and stronger hits. Sub-ohm vaping also requires more airflow to keep the coil cool, which can affect the flavor of the e-liquid.

What are the best sub-ohm devices on the market?

There are many great sub-ohm devices on the market, each with their own unique features and benefits. Some popular sub-ohm devices include the SMOK Alien, the Vaporesso Revenger, and the Wismec Reuleaux RX200.

Can sub-ohm vaping produce bigger clouds and stronger hits than regular vaping?

Yes, sub-ohm vaping can produce bigger clouds and stronger hits than regular vaping. This is because sub-ohm devices use coils with a lower resistance, which allows for more power to be delivered to the coil. However, it’s important to note that sub-ohm vaping is not for everyone and may not be suitable for beginners.