Why Is My Brand New Vape Burning? Tips to Troubleshoot the Issue

Are you experiencing a burnt taste when vaping on your brand new device? This can be a frustrating experience, especially when you were looking forward to enjoying your new purchase. But don’t worry, there are several reasons why your vape may be burning and solutions to fix it.

One common reason for a burnt taste is using a new coil without properly priming it. When you install a new coil, it’s important to prime it by saturating the wick with e-liquid before use. Failure to do so can result in a dry hit, which can burn the wick and produce a burnt taste. Another reason for a burnt taste can be vaping at high wattages, which can vaporize the e-liquid too fast and cause the coils to burn the wick even when there’s still some juice left.

It’s also possible that chain vaping, taking many puffs in a row, can cause the wick to dry up quickly and result in a burnt hit. Additionally, the type of e-liquid you’re using can affect the taste of your vape. E-liquids with high sugar content or dark, thick liquids can cause buildup on the coils, which can lead to a burnt taste. By understanding the common causes of a burnt taste and taking steps to prevent them, you can enjoy a smooth and flavorful vaping experience with your new device.

Understanding Your Vape Device

https://www.youtube.com/watch?v=D6cJLMU0LmI&embed=true

When you purchase a brand new vape device, it’s essential to understand how it works to avoid burning it. Here are some key components of your vape device that you should be aware of:

Battery

The battery is the power source of your vape device. It’s essential to ensure that your battery is fully charged before using your vape. A dead battery can cause your vape to burn, so it’s crucial to keep it charged.

Tank

The tank is where you store your e-liquid. It’s vital to ensure that your tank is properly connected to your battery and that it’s not over-tightened. An improperly connected tank can cause your vape to burn.

Coil

The coil is responsible for heating the e-liquid and producing vapor. It’s essential to prime your coil before using your vape device to avoid burning it. Priming your coil involves saturating the wick with e-liquid to prevent it from burning.

Wattage

The wattage is the amount of power that your vape device uses to heat the coil. Using too high of a wattage can cause your vape to burn. It’s essential to use the recommended wattage for your coil to avoid burning it.

Airflow

The airflow is the amount of air that passes through your vape device. Adjusting the airflow can affect the temperature of your vape. It’s essential to find the right balance of airflow to avoid burning your vape.

In conclusion, understanding your vape device is crucial to avoid burning it. By keeping your battery charged, ensuring your tank is properly connected, priming your coil, using the recommended wattage, and finding the right airflow, you can prevent your vape from burning and enjoy a smooth vaping experience.

Common Causes of Vape Burning

https://www.youtube.com/watch?v=2yC2TTsczLQ&embed=true

If you are experiencing a burning taste with your brand new vape, there are a few common causes that you should be aware of. Here are some of the most common reasons why your vape may be burning:

• Chain vaping: If you are taking too many puffs in a short amount of time, you may be chain vaping. This can cause your vape to overheat and burn the coil, resulting in a burnt taste. Try to take breaks between puffs to avoid this problem.

• Improper priming of coils: Coils need to be properly primed before use. If you do not prime your coils properly, they may not be able to wick properly, leading to a dry hit and a burnt taste. Make sure to follow the manufacturer’s instructions for priming your coils.

• Incorrect wattage: If you are vaping at a wattage that is too high for your coil, it can cause the coil to overheat and burn. Make sure to check the recommended wattage range for your coil and adjust your settings accordingly.

• Low e-liquid level: If your e-liquid level is too low, it can cause your coil to dry out and burn. Make sure to keep your tank filled with e-liquid to avoid this problem.

• Dirty coil: A dirty coil can also cause a burnt taste. Make sure to clean your coil regularly to prevent buildup of gunk or residue.

By understanding these common causes of vape burning, you can take steps to prevent this problem from occurring and enjoy a better vaping experience.

Proper Maintenance of Your Vape

To ensure that your brand new vape doesn’t burn, it’s important to maintain it properly. Here are two key aspects of vape maintenance that you should keep in mind:

Cleaning Your Vape

Cleaning your vape is an essential part of vape maintenance. Over time, e-liquid residue can build up on the inside of your device, which can affect the flavor of your vape. To prevent this from happening, you should clean your vape regularly. Here’s how to do it:

1. Disassemble your vape: Take apart your vape and separate the tank, coil, and mouthpiece.

2. Clean the tank: Rinse the tank with warm water and let it dry completely.

3. Clean the coil: If your coil is still in good condition, rinse it with warm water and let it dry completely. If it’s burnt out, replace it with a new one.

4. Clean the mouthpiece: Rinse the mouthpiece with warm water and let it dry completely.

5. Reassemble your vape: Once all the parts are dry, put your vape back together.

Changing Your Coil Regularly

Another important aspect of vape maintenance is changing your coil regularly. Over time, your coil will become burnt out and will need to be replaced. If you don’t replace your coil, your vape may start to taste burnt. Here’s how to change your coil:

1. Disassemble your vape: Take apart your vape and separate the tank, coil, and mouthpiece.

2. Remove the old coil: Unscrew the old coil from the tank.

3. Install the new coil: Screw the new coil into the tank.

4. Reassemble your vape: Once the new coil is installed, put your vape back together.

By following these two key aspects of vape maintenance, you can ensure that your brand new vape doesn’t burn and that you enjoy a great vaping experience every time.

Correct Usage Techniques

To prevent your brand new vape from burning, it is important to use it correctly. Here are some tips to help you use your vape properly:

Prime Your Coil

Before using your new vape, it is important to prime your coil. This means saturating the cotton in the coil with e-liquid before using it for the first time. To prime your coil, simply add a few drops of e-liquid to the cotton through the wick holes. Allow the coil to sit for a few minutes to ensure that the cotton is fully saturated. This will prevent the coil from burning when you use it for the first time.

Avoid Chain Vaping

Chain vaping, or taking many puffs in a row, can cause the wick to dry up too quickly, leading to a burnt taste. To avoid this, take breaks between puffs to allow the wick to soak up more e-liquid. If you notice a burnt taste, stop using your vape and allow the coil to cool down before using it again.

By following these simple tips, you can ensure that your brand new vape lasts longer and provides a better vaping experience.

Quality of Vape Juice

When it comes to vaping, the quality of the vape juice you use can have a significant impact on how your device performs. Poor quality vape juice can cause your brand new vape to burn, which can be frustrating and disappointing. In this section, we’ll discuss how the quality of vape juice can affect your device, and what you can do to ensure that you’re using the best possible juice.

Choosing the Right Vape Juice

One of the most important things you can do to ensure that your brand new vape doesn’t burn is to choose the right vape juice. There are many different types of vape juice available on the market, and not all of them are created equal. Some vape juices are made with low-quality ingredients that can cause your device to burn, while others are made with high-quality ingredients that can enhance the flavor and performance of your device.

When choosing a vape juice, it’s important to look for a product that is made with high-quality ingredients. You should also look for a product that is made by a reputable manufacturer, and that has good reviews from other vapers. This will help ensure that you’re getting a product that is safe, effective, and enjoyable to use.

Proper Storage of Vape Juice

In addition to choosing the right vape juice, it’s also important to store your juice properly. Improper storage can cause your juice to degrade, which can affect its flavor and performance. To ensure that your juice stays fresh and effective, you should store it in a cool, dry place, away from direct sunlight.

You should also make sure that your juice is stored in a container that is airtight and leak-proof. This will help prevent air and moisture from getting into the juice, which can cause it to degrade more quickly. If you’re unsure about how to store your vape juice properly, be sure to read the manufacturer’s instructions or consult with a knowledgeable vape shop employee.

By choosing high-quality vape juice and storing it properly, you can help ensure that your brand new vape doesn’t burn. This will help you enjoy your device to the fullest, without any frustration or disappointment.

Environmental Factors

When it comes to vaping, environmental factors can also play a role in why your brand new vape is burning. Here are some factors to consider:

Temperature Conditions

The temperature of your surroundings can affect your vaping experience. If it’s too cold, the liquid in your vape may become too thick and not vaporize properly, leading to a burnt taste. On the other hand, if it’s too hot, the liquid may become too thin and evaporate too quickly, also leading to a burnt taste.

To avoid this, try to keep your vape at room temperature. If you’re in a colder environment, you can warm up your vape by holding it in your hand for a few minutes before using it. If you’re in a hotter environment, try to keep your vape in a cooler place, such as a shaded area.

Altitude and Pressure

Altitude and pressure can also affect your vaping experience. At higher altitudes, the air pressure is lower, which can cause your vape to vaporize too quickly and lead to a burnt taste. Conversely, at lower altitudes, the air pressure is higher, which can cause your vape to vaporize too slowly and also lead to a burnt taste.

To avoid this, try to keep your vape at a consistent altitude and pressure. If you’re traveling to a higher altitude, you may need to adjust your vape accordingly by lowering the wattage or using a higher resistance coil. If you’re traveling to a lower altitude, you may need to adjust your vape by increasing the wattage or using a lower resistance coil.

By considering these environmental factors, you can help ensure that your brand new vape doesn’t burn and that you have a smooth vaping experience.